Learn all about the underbody mirror,a tool used to inspect the underside of a car.It can be installed on the bottom of the car to help observe and inspect the bottom of the car.Through the under-vehicle inspection mirror,you can check important components such as the chassis,suspension system,and transmission system to ensure the normal operation of the car.

　　Install the underbody inspection mirror

　　Installing an underbody inspection mirror requires some basic tools and steps:

　　1.Prepare tools and materials

　　Prepare the required tools and materials,such as under-vehicle inspection mirrors,screwdrivers,wrenches,etc.

　　2.Find the installation location

　　According to the structure and chassis design of the car,find a suitable location to install the underbody inspection mirror.Generally,the underbody inspection mirror should be installed in the center of the chassis,close to the front or rear axle.

　　3.Fix the underbody inspection mirror

　　Using a screwdriver and wrench,secure the underbody inspection mirror in the chosen position.Make sure the mirror is stable and can completely cover the area of the chassis.

　　Removing the underbody inspection mirror

　　Removing the underbody inspection mirror also requires some steps:

　　1.Remove the fixing screws

　　Using a suitable tool,remove the fixing screws on the underbody inspection mirror.Be careful not to loosen or drop the screws inside the chassis.

　　2.Carefully remove the underbody inspection mirror

　　Gently remove the underbody inspection mirror from the chassis.Check to see if any other fixtures are attached to the chassis and make sure to remove them as well.

　　By installing and removing the underbody inspection mirror,the problems of chassis components can be found and solved in time to ensure the safety and performance of the car.When installing and disassembling,pay attention to using the correct tools and methods,and operate carefully to avoid damage to the chassis.